trAvis - MANAGER

Edit File: Changes5.pod

# Copyright (c) 1995-2013 Sullivan Beck. All rights reserved. # This program is free software; you can redistribute it and/or modify it # under the same terms as Perl itself. =pod =head1 NAME Date::Manip::Changes5 - changes in Date::Manip 5.xx =head1 SYNOPSIS This describes the changes made to the Date::Manip module in the 5.xx series of releases. Major changes are marked with asterisks (*). For the most part, Date::Manip has remained backward compatible at every release, but occasionally, a change is made which is backward incompatible. These are marked with an exclamation mark (!). =head1 VERSION 5.xx As of December 2012, Version 5 of Date::Manip will no longer be modified. It is expected that version 5.64 will be the final release. The one exception is that if someone submits a patch that applies cleanly and causes zero failures in the test suite, I will consider adding it on a case-by-cast bases. Please use Date::Manip 6.xx instead. =head1 VERSION 5.64 (Released with 6.32) =over 4 =item Better handling of '0000' timezone Applied a patch supplied by Ed Avis that improves handling of the '0000' timezone.. =back =head1 VERSION 5.63 (Released with 6.26) =over 4 =item Fixed business mode calculation Applied a patch that I received some time ago to fix a business mode calculation. Steve Tempest =back =head1 VERSION 5.62 (Released with 6.21) No changes =head1 VERSION 5.61 (Released with 6.20) No changes =head1 VERSION 5.60 (Released with 6.14) =over 4 =item B<Fully integrated with 6.xx> As of Date::Manip 6.14, the 5.xx release is fully integrated into the distribution. Both will be installed automatically and you can switch between them (if you have a recent version of perl). This simplifies the package management process considerably. The downside is that Date::Manip 6.xx will be installed, even if you do not have a recent version of perl and cannot use it. =back =head1 VERSION 5.59 (Released with 6.12) =over 4 =item Test fixes Fix tests to work better on windows. =back =head1 VERSION 5.58 (Released with 6.11) =over 4 =item Test fixes Fixed a bug in some of the tests that were causing two tests to fail. JD Explicitly set TZ in all tests to avoid some failures (it got left out of a few when it was bundled with 6.10). =back =head1 VERSION 5.57 (Released with 6.10) =over 4 =item B<(*) Combined 5.xx and 6.xx> As of 6.10, Date-Manip-6.xx will contain both the Date::Manip 5.xx and 6.xx modules. If perl 5.10 or higher is available, the 6.xx version will be installed. For older versions of perl, the 5.xx version will be installed. This will allow all of the automatic module tools to work correctly. =item Bug fixes Fixed a bug where years earlier than 1000 AD failed in calculations. John =item Time zone fixes Improved time zone detection. Stepan Kasal =item Documentation fixes Minor improvements. Josef Kreulich =back =head1 VERSION 5.56 (2010-02-24) =over 4 =item Bug fixes Date_PrevWorkDay and documentation fix. RT #17005 I accidentally included a require 5.10 which made Date::Manip not work with earlier versions of perl. Nicholas Riley =back =head1 VERSION 5.55 (2010-02-22) =over 4 =item B<(*) Added time zone abbreviations> Date::Manip 5.xx now includes all of the time zone abbreviations from version 6.xx (i.e. all of the abbreviations from the Olsen database). =item Documentation fixes Typo fix. ddascalescu =back =head1 VERSION 5.54 (2008-05-09) =over 4 =item Released =back =head1 VERSION 5.53 (DEVELOPMENT) =over 4 =item Bug fixes Fix so it won't fail with "Too early to specify a build action" =item CPANTS changes Final changes to meet requirements on http://cpants.perl.org/ =back =head1 VERSION 5.52 (2008-05-08) =over 4 =item Released =back =head1 VERSION 5.51 (DEVELOPMENT) =over 4 =item Bug fixes Fixed bug where the wrong version was in Build.PL =item CPANTS changes Additional changes to meet requirements on http://cpants.perl.org/ =back =head1 VERSION 5.50 (2008-05-05) =over 4 =item Released =back =head1 VERSION 5.49 (DEVELOPMENT) =over 4 =item New features Added "ereyesterday". Ed Avis =item Time zone fixes Added time zones. Damyan Ivanov, Ernesto Hernandez-Novich, Gregor Herrmann, Nicholas Riley, Enrique Verdes, Alexander Litvinov =item Documentation fixes Corrected typo in %G and %L format descriptions. Troy A. Bollinger =item CPANTS changes Added Build.PL and several other things to meet requirements on http://cpants.perl.org/ =back =head1 VERSION 5.48 (2007-11-27) =over 4 =item Released =back =head1 VERSION 5.47 (DEVELOPMENT) =over 4 =item Bug fixes Fixed the version number. John R. Daily Fixed a warning when the date command not present. Daniel Hahler Fixed a bug where recurrences of the form 0:1*, 0:0:1*, etc., incorrectly required a base date. Gerry Lawrence Fixed a bug where "substring" was used instead of "substr". =item Time zone fixes Fixed a problem in the WEST time zone. Cristina Nunes Added time zone. Kimmo R. M. Hovi =item Documentation fixes Revised some of the documentation about Y2K (given that it's in the past) and the 2007 US daylight saving time rule changes. =back =head1 VERSION 5.46 (2007-02-21) =over 4 =item Released =back =head1 VERSION 5.45 (DEVELOPMENT) =over 4 =item New features Added "overmorrow". Ed Avis =item Bug fixes Fixed bug in parsing ISO 8601 dates. Paul Schinder Fixed a bug in UnixDate for years before 1000 AD. Joaquin Ferrero Fixed a bug where "today" wasn't case insensitive. Pedro Rodrigues Fixed a bug where business/approximate mode wasn't correctly used in DateCalc. Mark T. Kennedy Bug in DateCalc where you couldn't pass undef as the errref. Alex Howansky Bug where cygwin wasn't using the date command. Rafael Kitover =item Time zone fixes New time zones. Khairil Yusof, Andy Spiegel, Ernesto Rapetti New time zones. Robin Norwood Fixed Russian time zones. Yuri Kovalenko =item Language fixes Language fix for Danish. Claus Rasmussen Language fix for German. Andreas Dembach =item Documentation fixes Minor documentation improvement. Caminati Carlo Lots of spelling fixes. Asaf Bartov =back =head1 VERSION 5.44 (2005-06-02) =over 4 =item Released =back =head1 VERSION 5.43 (DEVELOPMENT) =over 4 =item B<(!) (*) Recurrences revisited> The behavior of some elements of recurrences changed. These included making the week element (N) refer to the Nth occurrence of a day of the week in the week, month, or year. It is now possible to look at the 3rd Friday of every month for example. Y-0-WOY-DOW now refers to the WOY'th occurence of DOW instead of the ISO 8601 date Y-W(WOY)-DOY. Also, changed Y-0-WOY-0 to refer to the WOY'th occurence of FirstDay, and got rid of the MW and MD flags. Many other similar changes. =item B<(!) Changed %x format in UnixDate> The %x format used to be equivalent to %D (%m/%d/%y), but it has been modified to use the DateFormat config variable, so it may return %d/%m/%y if a non-US DateFormat is specified. =item New features Added TodayIsMidnight. Reuben Thomas Added "approx" mode to Delta_Format and reversed change to default Delta_Format behavior to the one from version 5.40. Based on discussion with Adam Spiers. Added %O UnixDate format. Martin Thurn =item Bug fixes Fixed a bug is ParseRecur where values passed in were no overriding old values in the recurrence. Scott Barker (reported to the Debian bugs list). Fix for a potential problem in the "0000" time zone. Ed Avis Changed taint check to be the one in persec(1). Max Kalika Minor fix so DateInit("VAR=") will work. Thomas Bohme Fixed a bug where business mode was kept operative even after the calculation was over. Emiliano Bruni Minor change to run under cygwin. Niel Markwick Minor VMS fix. Martin P.J. Zinser Small fix to taint checking. David Worenklein Fixed a problem where deltas were getting misinterpreted as dates. Harry Zhu Fixed a bug in ParseRecur where "last day of every March" couldn't be done. Andras Karacsony Fixed a bug in business mode calculations. Tracy L Sanders Sorted all events and dates returned by Events_List. This fixes problems with tests on some versions of perl. Tulan Modified %x UnixDate format to use DateFormat config variable. Matt Lyons =item Time zone fixes Fixed a problem with single character military time zones (T and W) conflicting with ISO 8601 T and W dates. Hugo Cornelis Small correction to Brazil time zones. John McDonald Added time zones. Michael Wood-Vasey, Don Robertson, Michael D. Setzer II, Andres Tarallo =item Language fixes Fixed German translations. Oliver Scheit Minor corrections to Italian. Nicola Pedrozzi Added the language Catalan. Xavi Drudis =item Documentation fixes Minor doc fixes Reuben Thomas, Ed Avis, Thomas Winzig Clarified documentation on %W/%G/%U/%L formats. Joel Savignon =back =head1 VERSION 5.42a 2003-07-03 =over 4 =item Test fixes A quick fix to replace a faulty test. =back =head1 VERSION 5.42 (2003-07-02) =over 4 =item Released Number changed to distinguish between the development release (5.41) and the official release. =back =head1 VERSION 5.41 (DEVELOPMENT) As of 5.41, odd numbered releases are development (and appear only on my page). Even number releases are official releases submitted to CPAN. =over 4 =item B<(!) Changed path separator for VMS> Since ":" is used in some VMS paths, it should not have been used as the path separator. It has been changed to a newline ("\n") character. =item B<(!) Delta_Format behavior changed> The entire delta is exact if no month component is present (previously, no year or month component could be present). Due to discussion with Tim Turner. =item Bug fixes Small patch for OpenVMS. Martin P.J. Zinser Minor enhancement to ParseRecur. Randy Harmon Fixed a bug involving business deltas with negative hours. Ludovic Dubost Added some support for NetWare. Chris Shields Applied some robustness patches. Ed Avis Fixed a bug with years <1000. Jonathan Callahan Patch to make Manip.pm -Mstrict clean and better VMS support. Peter Prymmer Fixed a bug in "1st Saturday of 2005" format. Maurice Aubrey Taint check insecure $ENV{PATH} fix. Ed Avis Patch to allow deltas of the form "+ -1 day" to work. Ed Avis Removed ampersands from function calls in documentation to fit new perl coding standards. Bill Pollock Fixed a bug where spaces in a date caused problems in German (due to the number 1st, 2nd, etc. being 1., 2., etc.). Erik Roderwald =item Time zone fixes Minor bug fix where /etc/time zone not correctly read. Jacek Nowacki Made the UnixDate %Z format work with numeric time zones. Michael Isard Fixed bug where -HH:MM and +HH:MM were not being accepted as valid time zones. Hank Barta Fixed a bug where time zones -HH:MM weren't handled in ISO 8601 dates. Ed Avis Added some help for VMS time zones. Don Slutz Added some checking to the time zone determination. Ed Avis Added time zones. David Coppit, Daniel Serodio, Fabian Mandelbaum, Raul Dias, Pedro Melo CUNHA, Roman Y Malakhov, David Whiting, Khaled Mostaguir, Jason King =item Language fixes B<(*) Replaced all non-ASCII characters with hex representations to avoid the malformed UTF-8 character warnings. Ed Avis> Added Russian translation. Dapi Additions to Dutch translation. Willem Patch to French support. Patrick Turmel Added Tues/Thur abbreviations. Martin Thurn Added Turkish. Giray Added Danish. Jesper Dalberg A patch for Danish was send by Jorgen Norgaard previously, and I somehow overlooked it. I apologize for that. =item Test fixes Added runtests.bat contributed by Lon Amick =item Documentation fixes Minor doc fix. Jeremy Tietsort Fixed spelling of Veteran's day. Dirk Eddelbuettel Documentation improvements. James Olsen =back =head1 VERSION 5.40 (2001-06-07) =over 4 =item New features Added support for negative values is "epoch SECS" type dates. Larry Warner Added NWD/PWD/DWD flags to ParseRecur. Peter Wyngaard =item Bug fixes Fixed a warning. Edward Avis Fixed a bug where the date wasn't rolling over when parsing dates containing only times. James L. Gordon Fixed a bug where some times were defaulting to the current time instead of 00:00:00. Edward Avis Fixed a bug in Date_NthDayOfYear with decimal days. Olga Polyakov Fixed a bug where ParseDateDelta returned a delta if nothing was passed in. Jim Hranicky Fixed a bug where noon was case sensitive. Bion Pohl Fixed a bug where dateTtime wasn't parsed. Jeremy Brinkley Fixed a bug in holiday parsing involving recurrences. Jerry Wilcox Fixed a bug where an invalid date passed to Date_IsWorkDay produced an error message. Mark Rejhon Fixed a bug where EraseHolidays wasn't taking affect correctly. Chateauvieux Martial Fixed a bug where the list produced by Date_Init couldn't be passed back in to Date_Init. James Elson =item Time zone fixes Added `date +%Z` support in Date_TimeZone. Mike Bristow Fixed a warning if the time zone is supplied as a +HHMM format. Viola Mauro Fixed South African time zone. David Sieborger =item Documentation fixes Added an example. Philip Jones =back =head1 VERSION 5.39 (2000-06-27) =over 4 =item Bug fixes `date` uses the user's path unless taint checking is on. @::DatePath used instead of @Date::Manip::DatePath incorrectly. Fixed by John Labovitz. Fixed a bug where times such as "5 seconds ago" were not changing over time. Matthew R. Sheahan =item Time zone fixes Added /etc/time zone support to &Date_TimeZone. Dirk Eddelbuettel Added time zones. Dirk Eddelbuettel, Eli Selinger =back =head1 VERSION 5.38 (2000-05-23) =over 4 =item B<(*) Added Events> Added Events section to config file and Events_List routine. Prompted by Greg Schiedler and paid for by Alan Cezar. =item B<(!) Removed Date_DaysSince999> The Date_DaysSince999 function (deprecated in 5.35) has been removed. =item New features Added support for ISO8601 dates of the format dateTtime. Jason Pierce Got rid of the "use Cwd" and ENV{PATH} lines which means no more taint problems. =item Bug fixes Fixed "dofw" format to return the day of the current week as documented instead of next week. Dennis Ingram Fixed a bug where dates in years 1900, 1800, etc. (but not 2000 or other 400th years) were off by one day in DayOfWeek. Noble Thomas Fixed a bug in ParseRecur (2-digit years not treated correctly). Brian Rectanus =item Time zone fixes Added time zones. Nelson Ferreira, David Harper =item Documentation fixes Fixed some typos. Thanks to Alex Kapranoff Typo fixed. Jim Hranicky =back =head1 VERSION 5.37 (2000-02-14) =over 4 =item Bug fixes Set ENV{PATH} to help with taint checking. Joe Lipson Fixed a serious bug where HH:24:00 was broken due to support from 24:00:00. Scott Egashira =item Time zone fixes Fixed the sign on the military time zones. John Scott =back =head1 VERSION 5.36 (2000-01-21) =over 4 =item New features Added support for 24:00:00 to ParseDate. William H Asquith =item Bug fixes Fixed a bug in ParseRecur. Lewis Tsao Fixed a bug is UnixDate (%l format). Jon Hedley Fixed a bug in Date_GetNext/Prev. Christoph Haas Fixed a bug in Date_IsHoliday. Report and patch by Rolf Beutner Fixed a bug in UnixDate. Patch by Kurtis D. Rader Rewrote IsInt routine based on discussion with Sean Hunter (approximately 30% faster on a SPARC). =item Time zone fixes Added time zone. Paul Arzul =item Documentation fixes Fixed a documentation problem with Date_ConvTZ. Diab Jerius =back =head1 VERSION 5.35 (1999-07-06) =over 4 =item B<(!) Deprecated Date_DaysSince999> In fixing support for the years 0001-0999, I rewrote Date_DaysSince999 to be Date_DaysSince1BC. The Date_DaysSince999 function will be removed. =item B<(*) (!) Added PathSep variable> In order to better support Win32 platforms, I added the PathSep config variable. This will allow the use of paths such as "c:\date" on Win32 platforms. Old config files on Win32 platforms (which were not working correctly in many cases) may not work if they contain path information to the personal config file. =item B<(*) Recurrences now support flags> Flags for modifying recurrence dates are now supported. =item B<(*) Improved holiday support considerably> Added support for recurrences and one-year-only holidays (the latter requested first by Vishal Bhatia. =item B<(*) Date_Init improved> Date_Init can now return a list of config variables if called in array context. Based on a suggestion by Matt Tuttle. =item New features Modified Date_GetPrev/Date_GetNext to take $curr=2. Now parses the Apache log file format "dd/mmm/yyyy:hh:mm:ss (time zone)". Mark Ferguson Added OS/2 support. Michael B. Babakov Added Date_IsHoliday routine. Joe Pepin Added recurrence support for Easter (first suggested by Abigail). =item Bug fixes Made "epoch" not case sensitive and fixed a bug where it would fail in some languages. Caught because of Iosif's thorough Romanian test file. Fixed a problem where "in 5 days/weeks/months" sometimes wouldn't get correctly parsed in other languages. Caught because of Iosif's thorough Romanian test file. Fixed a weakness in ParseDateDelta brought out by the Romanian delta test file. Fixed a bug causing warnings in the beta version of perl. Patch by Paul Johnson. Fixed support for years 0000-0999. Requested by Chris Vaughan Several recurrence bug fixes. Put all the my'ed global variables in a couple hashes to clean up the namespace and to make a few future enhancements easier to do. Fixed a bug where business weeks weren't being used correctly. Qian Miao Fixed a serious typo in the DaysSince1BC routine. Qian Miao Fixed Veteran's day, added Good Friday (off by default). Peter Chen Cleaned up holiday variables and re-did holiday routines. =item Time zone fixes Added time zones. Oded Cohen =item Language fixes Added Romanian support (including 2 test files). Iosif Fettich Corrected Swedish translations. Danne Solli Some fixes to German translations. Peter Ehrenberg Added Italian. Nicola Pedrozzi =item Test fixes Added recurrence test suite =item Documentation fixes Several documentation updates. New recurrence documentation. =back =head1 VERSION 5.34 (1999-04-13) =over 4 =item B<(!) (*) All Date::Manip variables are no longer accessible> Previously, Date::Manip variables were declared using a full package name. Now, they are declared with the my() function. This means that internal variables are no longer accessible outside of the module. Based on suggestion by Tom Christiansen =item B<(!) Week interpretation in business mode deltas> A business mode delta containing a week value used to be treated as 7 days. A much more likely interpretation of a week is Monday to Monday, regardless of holidays, so this is now the behavior. =item B<(!) %z UnixDate format> The %z UnixDate format used to return the time zone abbreviation. It now returns it as a GMT offset (i.e. -0500). %Z still returns the time zone abbreviation. Suggested by Tuc. =item B<(!) Formats "22nd Sunday" returns the intuitive value> The date "22nd Sunday" used to return the Sunday of the 22nd week of the year (which could be the 21st, 22nd, or 23rd Sunday of the year depending on how weeks were defined). Now, it returns the 22nd Sunday of the year regardless. =item B<(!) Separator in DD/YYmmm and mmmDD/YY formats no longer optional> Previously, the date "Dec1065" would return Dec 10, 1965. After adding the YYYYmmm and mmmYYYY formats, this was no longer possible. The separator between DD and YY is no longer optional, so Dec1065 returns December 1, 1065 Dec10/65 returns December 10, 1965 =item B<(*) Date_Cmp added> In one of the next versions of Date::Manip, the internal format of the date will change to include time zone information. All date comparisons should be made using Date_Cmp (which currently does nothing more than call the Perl "cmp" command, but which will important when comparing dates that include the time zone). Added now in response to a question by Al Sorrell (I should have added it earlier). =item New features Added exact business mode. Ian Duplisse Added "mmmYYYY" and "YYYYmmm" formats. As a result, "DDYYmmm" and "mmmDDYY" formats changed to "DD/YYmmm" and "mmmDD/YY" as described above. David Twomey =item Bug fixes Fixed a bug where a date passed in as an array wasn't getting the date removed from the array. Rick Wise Added tests for MPE/iX OS. John Testa Fixed a bug where WorkDayBeg=8:00 went into an infinite loop. Mark Martinec Changed a business week to be the same as an exact week. Abigail Fixed a bug where "Sunday week 0" didn't work (only affected week 0) Gerald Rinske Minor bug (my variable declared twice). Paul J. Schinder Fixed a bug where "epoch SECONDS" was getting parsed wrong (for SECONDS which could be interpreted as an ISO-8601 date). N. Thomas Fixed a problem where init files were not being read. Mike Reetz =item Time zone fixes At the request of the UN, I added the SAT time zone. :-) Howard Hendler Fixed a bug where time zones were converted multiple times if ConvTZ was set and DateCalc called. Steven Hartland =item Language fixes Added Portuguese. Rui Pedro da Silva Leite Pereira =item Documentation fixes A number of typos fixed. Ron Pero =back =head1 VERSION 5.33 (1998-08-20) =over 4 =item Bug fixes Fixed a bug where "1 month ago" was no longer working (and added it to the test cases). This broke when I fixed the "-1second" bug in the previous version. A result of this is that a number of "deltas" can be parsed as dates (i.e. &ParseDate("1 hour 20 minutes ago") is equivalent to &DateCalc("now","1 hour 20 minutes ago")). Only text deltas can be used in this way (i.e. &ParseDate("-0:0:0:0:1:20:0") will not work). =item Language fixes Added Spanish support. Bautista Jasso Javier =back =head1 VERSION 5.32 (1998-08-17) =over 4 =item B<(!) Date_Init arguments> The old style Date_Init arguments that were deprecated in version 5.07 have been removed. =item B<(!) (*) DateManip.cnf change> Changed .DateManip.cnf to Manip.cnf (to get rid of problems on OS's that insist on 8.3 filenames) for all non-Unix platforms (Windows, VMS, Mac). For all Unix platforms, it's still .DateManip.cnf . It will only look in the user's home directory on VMS and Unix. =item New features Added "in N days" and "N days ago" formats. Tony Bowden. Added cYYYY format to YYtoYYYY variable. Mark Rejhon. Added 2 days/weeks/months later in both ParseDate and ParseDelta (for Dutch support). Abigail. Added "Y:M:0*-DOM:0:0:0" to ParseRecur. Jeff Yoak. =item Bug fixes Fixed a bug where the deltas could be off by up to a couple minutes in some rare cases. Herman Horsten. Fixed an "uninitialized symbol" warning. Mark D. Anderson. Fixed a bug where holidays weren't erased. Jonathan Wright. Applied a bug fix from Joe Chapman where the %W/%U UnixDate formats were frequently wrong. Several minor fixes and improvements. Abigail. Added some VMS support. Charles Lane. Fixed a bug which caused a test to fail on some systems. Charles Lane. Fixed a bug where "-1second" was treated as a date rather than a delta in DateCalc. Kenneth Ingham Added a bit to the Makefile.PL (as it was distributed in the Win32 Perl Resource Kit). Murray Nesbitt =item Time zone fixes Allowed time zones of the format STD-#DST-#. Peter Gordon. Added time zone support for "+0500 (EST)". Tom Christiansen. Restricted time zones parsing to 0000-2359 instead of 0000-9999. Frank Cusack Added time zones. W. Phillip Moore, Michael Smith, Samuli Karkkainen =item Language fixes Added Polish support. Ian Wojtowicz. Added Dutch support. Abigail. Added A.M. and P.M. parsing (not just AM and PM). William W. Arnold. Fixed a German initialization problem. Thomas Horster-Moller and Christian Reithmaier =item Documentation fixes Documentation fix. Peter Gordon. Minor documentation changes. Yamamoto Hiroshi. Added info about the RCS problem. Supplied by Kipp E. Howard. =back =head1 VERSION 5.31 (1998-04-08) =over 4 =item New features Added "epoch SECS" format to ParseDateString. Thanks to: Joshua M. Burgin. Added a patch by Blair Zajac to make Date_NthDayOfYear work with decimal days. =item Bug fixes Fixed a bug in ParseDateDelta (seems to appear only in 5.005 pre-releases). Found by Larry W. Virden. Missed one form in ParseDate. Noted by Tuc. Fixed a bug where "15:00:00" couldn't be parsed. Michael Pizolato. Split Manip.pm. New files are HISTORY, TODO, Manip.pod. Fixed a bug in ParseDateDelta. Antonio Rosella. Removed the only occurence of $& (which may speed some things up). Fix by Ken Williams. First suggested by Abigail. Fixed an overflow bug in doing date calculations with 2 dates more than 70 years apart. Fix by Vishal Bhatia. Fixed a bug where "5:00pm" wasn't always parsed correctly. Thanks to Jim Trocki. Fixed a bug in UnixDate (it wouldn't return the correct string for a format who's last character was '0') noted by Ramin V. =item Time zone fixes Relaxed some restrictions on time zones so ISO-8601 dates can use non-ISO-8601 time zones. Noted by John Chambers. Fixed a bug in converting time zones with a minutes field (+1030). Found by Paul O. =item Language fixes Some fixes to the French translations by Emmanuel Bataille. Added German support. Thanks to Andreas C. Poszvek. =item Documentation fixes Minor documentation fixes. Will Linden. Fixed a documentation problem with Date_GetPrev. It was still 0-6 instead of 1-7. Thanks to Robert Klep. =back =head1 VERSION 5.30 (1998-01-21) =over 4 =item B<(!) (*) Delta format changed> A week field has been added to the internal format of the delta. It now reads "Y:M:W:D:H:MN:S" instead of "Y:M:D:H:MN:S". =item B<(*) Now handles recurring events> Added ParseRecur. First suggested by Chris Jackson. =item New features All routines can now take either a 2- or 4-digit year. Added Delta_Format. First suggested by Alan Burlison. Added Date_SetDateField. Thanks to Martin Thurn. =item Bug fixes Made the $err argument to DateCalc optional. Changed the name of several of the library routines (not the callable ones) to standardize naming. =back =head1 VERSION 5.21 (1998-01-15) =over 4 =item B<(!) Long running processes may give incorrect time zone> A process that runs during a time zone change (Daylight Saving Time specifically) may report the wrong time zone. See the UpdateCurrTZ variable for more information. =item B<(!) UnixDate "%J", "%W", and "%U" formats fixed> The %J, %W, and %U will no longer report a week 0 or a week 53 if it should really be week 1 of the following year. They now report the correct week number according to ISO 8601. =item New features Added YYtoYYYY variable. Suggested by Michel van der List. Added the UpdateCurrTZ variable to increase speed at the cost of being wrong on the time zone. Added British date formats. Thanks to Piran Montford. Monday week today week as well as some US formats in 2 months next month Time can now be written 5pm. Piran Montford. Added the TomorrowFirst variable and Date_NearestWorkDay function. Added UnixDate formats %G and %L to correctly handle the year. Thanks to Samuli Karkkainen. Added ForceDate variable. Based on a suggestion by Christian Campbell. =item Bug fixes Now passes Taint checks. Thanks to Mike Fuhr, Ron E. Nelson, and Jason L Tibbitts III. Put everything in a "use integer" pragma. Added a missing space in the %g UnixDate format. Thanks to Mike Booth. Removed all mandatory call to Date_Init (only called when current time is required). Significantly faster. Fixed a bug in Date_ConvTZ. Thanks to Patrick K Malone. Fixed a bug in Date_IsWorkDay. =item Time zone fixes Fixed some Australian time zones. Kim Davies. =item Language fixes Cleaned up multi-lingual initialization and added the IntCharSet variable. Improved French translations. Thanks to Emmanuel Bataille. Added "Sept" as a recognized abbreviation. Thanks to Martin Thurn. Typo in the French initialization. Thanks to Michel Minsoul. =item Test fixes Fixed the tests to not fail in 1998. =item Documentation fixes Documented how to get around Micro$oft problem. Based on a mail by Patrick Stepp. =back =head1 VERSION 5.20 (1997-10-12) =over 4 =item B<(*) ISO 8601 support> ISO 8601 dates are now parsed. This resulted in several other changes specified below. =item B<(!) (*) ParseDate formats removed> As a result of ISO 8601 support, some formats which previously worked may no longer be parsed since they conflict with an ISO 8601 format. These include MM-DD-YY (conflicts with YY-MM-DD) and YYMMDD (conflicts with YYYYMM). MM/DD/YY still works, so the first form can be kept easily by changing "-" to "/". YYMMDD can be changed to YY-MM-DD before being parsed. Whenever parsing dates using dashes as separators, they will be treated as ISO 8601 dates. You can get around this by converting all dashes to slashes. =item B<(!) (*) Week day numbering> The day numbering was changed from 0-6 (Sun-Sat) to 1-7 (Mon-Sun) to be ISO 8601 compatible. Weeks start on Monday (though this can be overridden using the FirstDay config variable) and the 1st week of the year contains Jan 4 (though it can be forced to contain Jan 1 with the Jan1Week1 config variable). =item New features Several new parsing formats added, including: "Friday" suggested by Rob Perelman "12th" suggested by Rob Perelman "last day of MONTH" suggested by Chadd Westhoff Added ParseDateString for speed (and simplicity for modifying ParseDate) Added %J and %K formats to UnixDate. Added Date_DaysInMonth. =item Bug fixes Reorganized ParseDate more efficiently. Fixed some incorrect uses of $in instead of $future in ParseDate. Thanks to Erik Corry. Added some speedups (more to come). =item Test fixes Cleaned up testing mechanism a bit and added tests for ISO 8601 formats. =back =head1 VERSION 5.11 (1997-08-07) Version 5.11 was never released to CPAN. =over 4 =item Bug fixes Added one more check for NT perl. Thanks to Rodney Haywood. Added some comments to help me keep my personal libraries up-to-date with respect to Date::Manip and vice-versa. Fixed a bug which showed up in French dates (though it could happen in other languages as well). Thanks to Georges Martin. Fixed a bug in DateCalc. Thanks to Thomas Winzig. Removed the "eval" statement from CheckFilePath which causes a suid c wrapper program to die when it calls a Date::Manip script. Thanks to Hank Hughes. Fixed a bug in business mode calculations. Thanks to Sterling Swartwout. Fixed a bug in which "1997023100:00:00" was accepted as valid. Thanks to Doug Emerald. Fixed a bug in which ConvTZ was not used correctly in ParseDate. Re-did portions of Date_ConvTZ. Thanks to Vivek Khera. Fixed a bug in business mode calculations. Thanks to Ian Duplisse. Added $^X check for Win95 perl. Thanks to Walter Soldierer. Missed one call to NormalizeDelta so the output was wrong. Thanks to Brad A. Buikema. =item Time zone fixes Added time zones. Paul Gillingwater, Rosella Antonio, Kang Taewook =back =head1 VERSION 5.10 (1997-03-19) =over 4 =item Bug fixes Cleaned up In, At, and On regexps. Added 2 checks for MSWin32 (date command and getpw* didn't work). Thanks to Alan Humphrey. Fixed two bugs in the DateCalc routines. Pointed out by Kevin Baker. Added a check for Windows_95. Thanks to Charlie W. Cleaned up checks for MacOS and Microsoft OS's. Hopefully I'm catching everything. Thanks to Charlie Wu for one more check. Fixed a typo which broke Time%Date (Date=dd%mmm%yy) format. Thanks to Timothy Kimball. =item Time zone fixes Fixed some problems with how "US/Eastern" type time zones were used. Thanks to Marvin Solomon. =item Test fixes Tests will now run regardless of the time zone you are in. Test will always read the DateManip.cnf file in t/ now. A failed test will now give slightly more information. DateManip.cnf file in t/ now sets ALL options to override any changes made in the Manip.pm file. =item Documentation fixes Added documentation for backwards incompatibilities to POD. Fixed some problems in POD documentation. Thanks to Marvin Solomon. Fixed minor POD error pointed out by John Perkins. Changed documentation for Date_IsWorkDay (it was quite confusing using a variable named $time). Thanks to Erik M. Schwartz. Fixed typo in documentation (midnight misspelled). Thanks to Timothy Kimball. =back =head1 VERSION 5.09 (1997-01-28) =over 4 =item Bug fixes Upgraded to 5.003_23 and fixed one problem associated with it. Used carp and changed all die's to confess. Replaced some UNIX commands with perl equivalents (date with localtime in the tests, pwd with cwd in the path routines). Cleaned up all routines working with the path. =item Test fixes Tests work again (broke in 5.08). Thanks to Alex Lewin and Michael Fuhr for running debugging tests. =back =head1 VERSION 5.08 (1997-01-24) =over 4 =item Bug fixes B<(*) Fixed serious bug in ConvTZ pointed out by David Hall.> B<(*) Modified Date_ConvTZ (and documented it).> =back =head1 VERSION 5.07p2 1997-01-03 Released two patches for 5.07. =over 4 =item Bug fixes Fixed a bug where a delta component of "-0" would mess things up. Reported by Nigel Chapman. =item Time zone fixes B<(*) Can now understand PST8PDT type zones (but only in Date_TimeZone).> Added lots of time zone abbreviations. =item Test fixes Fixed some tests (good for another year). =back =head1 VERSION 5.07 (1996-12-10) =over 4 =item B<(!) UnixDate "%s" format> Used to return the number of seconds since 1/1/1970 in the current time zone. It now returns the number of seconds since 1/1/1970 GMT. The "%o" format was added which returns what "%s" previously did. =item B<(!) (*) Internal format of delta> The format for the deltas returned by ParseDateDelta changed. Previously, each element of a delta had a sign attached to it (+1:+2:+3:+4:+5:+6). The new format removes all unnecessary signs by default (+1:2:3:4:5:6). Also, because of the way deltas are normalized (see documentation on ParseDateDelta), at most two signs are included. For backwards compatibility, the config variable DeltaSigns was added. If set to 1, all deltas include all 6 signs. =item B<(!) (*) Date_Init arguments> The format of the Date_Init calling arguments changed. The old method Date_Init($language,$format,$tz,$convtz); is still supported , but this support will likely disappear in the future. Use the new calling format instead: Date_Init("var=val","var=val",...); NOTE: The old format is no longer supported as of version 5.32 . =item B<(*) Added weeks to ParseDateDelta.> Suggested by Mike Bassman. Note that since this is a late addition, I did not change the internal format of a delta. Instead, it is added to the days field. =item B<(*) Now reads a config file.> Refer to the Date_Init documentation for details. =item B<(*) Added business mode.> See documentation. Suggested by Mike Bassman. =item New features B<(*) Modified how deltas are normalized and added the DeltaSigns config variable.> Added %q format "YYYYMMDDHHMMSS" to UnixDate. Requested by Rob Perelman. Also added %P format "YYYYMMDDHH:MM:SS". Added a new config variable to allow you to work with multiple internal formats (with and without colons). Requested by Rob Perelman. See Date_Init documentation. Added the following formats suggested by Andreas Johansson: Sunday week 22 [in 1996] [at 12:00] 22nd Sunday [in 1996] [at 12:00] Sunday 22nd week [in 1996] [at 12:00] Added a new config variable to allow you to define the first day of the week. See Date_Init documentation. Added the following formats to ParseDate for convenience (some were suggested by Mike Bassman): next/last Friday [at time] next/last week [at time] in 2 weeks [at time] 2 weeks ago [at time] Friday in 2 weeks in 2 weeks on Friday Friday 2 weeks ago 2 weeks ago Friday Added Date_SecsSince1970GMT, moved the %s format to %o (secs since 1/1/70) and added %s format (secs since 1/1/70 GMT). Based on suggestions by Mark Osbourne. Note this introduces a minor backward incompatibility described above. Date_SetTime now works with international time separators. Added the %g format (%a, %d %b %Y %H:%M:%S %z) for an RFC 1123 date. Suggested by Are Bryne. Added options to delete existing holidays and ignore global config file. Date_GetNext and Date_GetPrev now return the next/prev occurence of a time as well as a day. Suggested by Are Bryne. In approximate mode, deltas now come out completely normalized (only 1 sign). Suggested by Rob Perelman. Added Date::Manip::InitDone so initialization isn't duplicated. Added a 3rd internal format to store YYYY-MM-DD HH:MN:SS (iso 8601). Added a config variable to allow you to work with 24 hour business days. Suggested by Mike Bassman. ParseDateDelta now returns "" rather than "+0:0:0:0:0:0" when there is an error. =item Bug fixes B<(*) The d:h:mn:s of ALL deltas are normalized.> Huge number of code changes to clean things up. Subroutines now check to see if 4 digit years are entered. Suggested by Are Bryne. Added local($_) to all routines which use $_. Suggested by Rob Perelman. Complete rewrite of DateCalc. Fixed a bug where UnixDate %E format didn't work with single digit dates. Patch supplied by Jyrgen Nyrgaard. Fixed a bug where "today" was not converted to the correct time zone. =item Time zone fixes Fixed bug in Date_TimeZone where it didn't recognize +HHMN type time zones. Thanks to Are Bryne. Added WindowsNT check to Date_TimeZone to get around NT's weird date command. Thanks to Are Bryne. Fixed typo (CSD instead of CST). Fixed sign in military time zones making Date::Manip RFC 1123 compliant (except that time zone information is not stored in any format) =item Test fixes B<(*) Added test suite!> =back =head1 VERSION 5.06 (1996-10-25) =over 4 =item New features Added "today at time" formats. ParseDateDelta now normalizes the delta as well as DateCalc. Added %Q format "YYYYMMDD" to UnixDate. Requested by Rob Perelman. =item Bug fixes Fixed another two places where a variable was declared twice using my (thanks to Ric Steinberger). Fixed a bug where fractional seconds weren't parsed correctly. Fixed a bug where "noon" and other special times were not parsed in the "which day of month" formats. Fixed a minor bug where a few matches were case sensitive. The command "date +%Z" doesn't work on SunOS machines (and perhaps others) so 5.05 is effectively broken. 5.06 released to fix this. Reported by Rob Perelman. =back =head1 VERSION 5.05 (1996-10-11) =over 4 =item New features Changed deltas to be all positive or all negative when produced by DateCalc. Suggested by Steve Braun Added DateManipVersion routine. B<(*) Parses RFC 822 dates (thanks to J.B. Nicholson-Owens for suggestion).> Parses ctime() date formats (suggested by Matthew R. Sheahan). Now supports times like "noon" and "midnight". =item Bug fixes Fixed bug introduced in 5.04 when default day set to 1. When no date given, have day default to today rather than 1. It only defaults to one if a partial date is given. Fixed bug where Date_DaysSince999 returned the wrong value (the error did not affect any other functions in Date::Manip due to the way it was called and the nature of the error). Pointed out by Jason Baker Dates with commas in them are now read properly. Fixed two places where a variable was declared twice using my (thanks to Ric Steinberger). Hopefully fixed installation problems. Got rid of the last (I think) couple of US specific strings. Fixed bug in Date_SetTime (didn't work with $hr,$min,$sec < 10). Added ModuloAddition routine and simplified DateCalc. =item Time zone fixes B<(*) Now supports time zones.> B<(*) Added Date_ConvTZ routine for time zone support.> Date_TimeZone will now also check `date '+%Z'` suggested by Aharon Schkolnik. =item Language fixes Added Swedish translation (thanks to Andreas Johansson The time separators are now language specific so the French can write "10h30" and the Swedes can write "10.30". Suggested by Andreas Johansson. =item Documentation fixes Fixed bad mistake in documentation (use Date::Manip instead of use DateManip) pointed out by tuc@valhalla.stormking.com Minor improvements to documentation. Documented the 'sort within a sort' bug. Fixed type in documentation/README pointed out by James K. Bence. =back =head1 VERSION 5.04 (1996-08-01) =over 4 =item New features Added support for fractional seconds (as generated by Sybase). They are parsed and ignored. Added by Kurt Stephens =item Bug fixes Fixed bugs reported by J.B. Nicholson-Owens "Tue Jun 25 1996" wasn't parsed correctly (regexp was case sensitive) full day names not parsed correctly the default day in ErrorCheck should be 1, NOT currd since when currd>28, it may not be a valid date for the month =back =head1 VERSION 5.03 (1996-07-17) =over 4 =item Bug fixes Fixed a couple of bugs in UnixDate. Declared package variables to avoid warning "Identifier XXX used only once". Thanks to Peter Bray for the suggestion. =back =head1 VERSION 5.02 (1996-07-15) =over 4 =item New features B<(*) Added some internationalization (most of the routines had to be modified at least slightly)> =item Bug fixes Fixed a bug where repeated calls to ParseDate("today") was not reset Replaced the %Date::Manip::Date variable with a large number of other, more flexible variables Rewrote the Init routine =back =head1 VERSION 5.01 (1996-06-24) =over 4 =item New features Added %F format to UnixDate. Rob Perelman Added "Date at Time" types Weekdays can be entered and checked Two digit years fall in the range CurrYear-89 to CurrYear+10 =item Bug fixes Reworked a number of the ParseDate regular expressions to make them more flexible =item Documentation fixes Fixed a typo (Friday misspelled Fridat). Rob Perelman Documentation problem for \$err in DateCalc. Rob Perelman =back =head1 VERSION 5.00 (1996-06-21) =over 4 =item B<(*) Switched to a package.> Patch supplied by Peter Bray: renamed to Date::Manip changed version number to 2 decimal places added POD documentation Thanks to Peter Bray, Randal Schwartz, Andreas Koenig for suggestions =item Bug fixes Fixed a bug pointed out by Peter Bray where it was complaining of an uninitialized variable. =back =head1 VERSION 4.3 (1995-10-26) =over 4 =item New features Added "which dofw in mmm" formats to ParseDate. Mark Dedlow =item Bug fixes Added a bugfix of Adam Nevins where "12:xx pm" used to be parsed "24:xx:00". =back =head1 VERSION 4.2 (1995-10-23) =over 4 =item New features UnixDate will now return a scalar or list depending on context ParseDate/ParseDateDelta will now take a scalar, a reference to a scalar, or a reference to an array B<(*) Simple time zone handling> B<(*) Added Date_SetTime, Date_GetPrev, Date_GetNext> =item Bug fixes Added copyright notice (requested by Tim Bunce) =back =head1 VERSION 4.1 (1995-10-18) =over 4 =item New features B<(*) Added DateCalc> =item Bug fixes Changed %DATE_ to %DateManip::Date B<(*) Rewrote ParseDateDelta> =back =head1 VERSION 4.0 (1995-08-13) B<(*) First public release> =over 4 =item New features Added time first formats to ParseDate =item Bug fixes B<(*) Switched to perl 5> Cleaned up ParseDate, ParseDateDelta =back =head1 VERSION 3.0 (1995-05-03) =over 4 =item New features Added today/tomorrows/etc. formats B<(*) Added UnixDate> B<(*) Added ParseDateDelta> =item Bug fixes Added %DATE_ global variable to clean some stuff up Simplified several routines =back =head1 VERSION 2.0 (1995-04-17) =over 4 =item New features Included ideas from Time::ParseDate (David Muir Sharnoff) Included ideas from date.pl 3.2 (Terry McGonigal) B<(*) Added seconds to ParseDate> =item Bug fixes Made error checking much nicer =back =head1 VERSION 1.2 (1995-03-31) =over 4 =item New features Added a few date formats =item Bug fixes Made months case insensitive =back =head1 VERSION 1.1 (1995-02-08) =over 4 =item New features Added leap year checking Both "Feb" and "February" formats available =back =head1 VERSION 1.0 (1995-01-20) =over 4 =item B<(*) Initial release> Though not released to the public, the initial released combined routines from several scripts into one library. =back =head1 BUGS AND QUESTIONS Please refer to the Date::Manip::Problems documentation for information on submitting bug reports or questions to the author. =head1 SEE ALSO Date::Manip - main module documentation =head1 LICENSE This script is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =head1 AUTHOR Sullivan Beck (sbeck@cpan.org) =cut